Morris Yellow Jacket-Any experience?
08-09-2011, 12:25 PM
#26
RE: Morris Yellow Jacket-Any experience?
I got a few good flights on mine today. I have changed the wing incidence down to about 0.8 degrees (from the designed 2) but could probably just put it at zero. I have also put about 3 degrees of downthrust on the engine (compared to the designed zero degrees). It still climbs a little a full speed so one could probably just build it with zero on all angles instead.
I have now also put an old Norvel in the front and it spins a cox 5x4 at about 20500rpm (on 10% nitro) with a nice happy sound to it. Good speed and still unlimited vertical, just love to make those large horizontal eights at full speed and low height...
I have now also put an old Norvel in the front and it spins a cox 5x4 at about 20500rpm (on 10% nitro) with a nice happy sound to it. Good speed and still unlimited vertical, just love to make those large horizontal eights at full speed and low height...
03-30-2014, 01:49 PM
#27
Junior Member
Join Date: Jan 2013
Location: , SC
Posts: 2
Likes: 0
Received 0 Likes
on
0 Posts
Wanted to Add this Little 1/2A Yellow Jacket
This little plane was done very nice. I cant take credit for it. The builder was in Columbia, SC. A very nice guy. This little one has a PULL Pull rudder and elevator. Too small for me, May put it on eBay.
Ooops, needed some sleep it is pull-pull not push pull..... Thanks for mentioning it to me.
Last edited by rusty0125; 03-31-2014 at 01:55 AM.
