Mini-t ESC?
#2
Senior Member
Join Date: Jun 2007
Location: smithsburg,
MD
Posts: 1,051
Likes: 0
Received 0 Likes
on
0 Posts
RE: Mini-t ESC?
is the mini t stock ? meaning does it still have the losi esc/ rx combo ? if it has the esc/rx combo you would have to swap out basacialy all the electronics in order to use an aftermarket esc . in that case your best bet would be just to replace the combo unit . if your mini t has already been changed to a 3 wire servo and rx then you might want to check the marketplace on rcu for a novak spy esc or maybe a esc from a losi slider or ae 18 they all work pretty nicely . hope that helps
#3
Thread Starter
My Feedback: (18)
Join Date: Apr 2008
Location: Eure,
NC
Posts: 632
Likes: 0
Received 0 Likes
on
0 Posts
RE: Mini-t ESC?
Still got that pain in the butt 4 wire stuff but I have a steering servo that will fit that I can use in the place of the stock one. Will look into the one you sugested. Thanks!!
#4
Senior Member
Join Date: Jun 2007
Location: smithsburg,
MD
Posts: 1,051
Likes: 0
Received 0 Likes
on
0 Posts
RE: Mini-t ESC?
good ol 4 wire combo . if you want another stock set up i have a spair esc,rx combo here you can have for nothing at all , i will never use it lol. pm me if you want it but i would advise just switching everything out to the 3 wire set up . also you might want to look around on www.hobbyking.com
they have some very cheap brushless set ups like the 18 amp combo for a mini. just a thought
they have some very cheap brushless set ups like the 18 amp combo for a mini. just a thought