trx1

My Feedback: (2)

well, heres my latest build ive started on


need a lot i know, but im working on it as i can afford to

Useless

Picked up this used mini t a week or so ago, got it for my fiancee to run so she wouldn't feel left out. I've found myself driving it more than her as Iwas waiting on parts for my MiniDT the past week. Decided to see what it would look like with the DT wheels and bumper on..... looked good until the stock motor burnt out on the third run with LiPos...... oh well, upgrade time!

MiniT

I have figured some of the best batteries to use with the stock AAset up. Try the Energizer Rechargable, They have 2000 Mah and work great. My truck rips it up in the sandbox even stock with those things. They are only 1.2 volts but they outperformed most other 1.5 batteries I have tried. Pretty cool.

trx1

My Feedback: (2)

well, traded my NTC3 for a mini-t

needs a stock esc and its running!

MetalXMulisha

My Feedback: (1)

I just bought a losi 2s 1000mah lipo for mini-dt and it only charged to 648. Is there something that I did wrong or is it because it was in storage mode for the time it took to sale? Thank you if you need more info let me know.
BTW I used a hyperion 0606i charger at 1amp

mrbonez

your lipo should have been stored with about 80% charge so you should be good to go just be sure the lipo isn't puffed up or swollen.
after you run it down it should take full charge

MetalXMulisha

My Feedback: (1)

Thank you that is exactly what it did. Tried to do all my homework on lipos but I still have a few questions.

grrc

my brother and i purchased 2 used mini t cars. One of the esc's is one piece but the other is two seperate pieces, what is the difference?

mrbonez

the one has a losi combo unit esc/rx and the other one has the later were you had separate units , i would think . combo unit should have a 5 wire servo. or a 4 wire i forget and the other should have a 3 wire servo .

grrc

I have another question now, this has been happening for a while but i was wondering why my mini t esc (the 3 wire one) cuts off the battery when it thinks the battery is dead but it isn't dead yet

grrc

also i forgot this problem i am having in the above comment does this happen with a brand new mini t and is there a way to bypass it or should i get a new esc since i don't like how it cuts the battery off

grrc

i have lots of fun with racing slick tires i dont know how much they are but they are fun, if you like sliding

grrc

hey my esc stops the motor from moving when it thinks the battery is going dead why does it do this? my esc is the double one. The steering servo will still work but the motor wont the motor is brand new and it did the same thing with my old motor

grrc

hey guys do any of you use nimh esc still i have a stock one and it causes a problem i was wondering that maybe you could give me a link. i dont want a lipo one though

f150dan

My Feedback: (18)

I just got this mini baja off eBay.



I've always liked how these look and been wanting one for a while. It's all stock but I plan on removing all stock electronics to replace them with a 2.4 radio, brushless, and lipo. I'm thinking about the Novak mongoose system. Planning on running 2S lipo. Also need bearings, aluminum shocks and a few carbon fiber goodies.

trx1

My Feedback: (2)

just picked up a stock mini-t! not sure where to start on it....
yes it came with the 4aa holder...

trx1

My Feedback: (2)

Yes this is a old thread, but i just got a 2nd mini-t.
after reading through it,ive seen these trucks go from
st to mt,sand dune racer, to street machine
to a halo buggy. even a hello kitty st.
this is one of the most versitle r/cs ive ever seen. (next to a rc10 that is)
ideas ideas...where to start???

trx1

My Feedback: (2)

does anyone know where i can get brushes for a orion baja motor??