maxxin2.5

yeah hobbytownusa.. i am not sure if they have them though i will call them tomarrow..

muck76

i had a Baja motor in my first mini-t and liked it, but this slider motor does impress me.

maxxin2.5

i just hope that it is fast..

westphill24

Yeah the stock slider/baja motor is great. Until I get my brushless esc that will be all Im running.

maxxin2.5

i dont want to go bl in my mini t it makes me want to just punch the throttle and do 30 foot wheelies..

maxxin2.5

hey does anyone know if the hs -50 or hs-65 servo will fit? my lhs doesnt have the 55.. and i want to drive!

muck76

i use a 65 in mine. I did have to remove some of the chassis, but not much..

maxxin2.5

well removeing some of the chasis isnt an option for me.. i have a cf chassis.. and alunminum braces and mounts..

muck76

then you will be fine. I have the stock mini chassis and i had to remove a flag behind the servo to fit it. Not really part of the chassis but is trimming.... The baja mini-t chassis has that part all ready gone so....

either way you have less in the way on the CF chassis and will be ok.

westphill24

Does anyone know what the orange stuff that comes with the MIP diff is?

muck76

i would assume lube...
http://www3.towerhobbies.com/cgi-bin...?&I=LXMUM6&P=7

westphill24

I ran out of diff lube and used that instead and it messed my 18t's diffs up. I have to stop being cheap and stock up on the right supplies.

muck76

i've used automotive bearing grease before.

westphill24

Well that stuff gummed up my diffs and thats where all my problems came from. I turned the diff in my mini baja around and that set that problem straight also. Now I see why they give you 2 different lubes. Now I just need a nice day so I can go to the track and watch them fly.

muck76

are they geared diffs or ball diff?

MMT GUNS

Me too! I think is the best thing I did on my mini baja, ever since I did it it hasn't strip and that was last summer till this date. The grease I use was cam lube from Crane Cams it works is rally good. wont use anything else.

muck76

Is cam grease thinner than bearing grease?

My lhs had some marine grease i grabbed a while back and like that also. Smelly but works.

Mr. Mugen

Why not use AE's green slime? I love that stuff.

MMT GUNS

Nope there about the same thickness the difference of the Cam lube "if I'm not mistaken" it have Kevlar in it (not sure) but i will get that info for tomorrow.

brainleak

My Feedback: (1)

I use green slime for everything, Works great on shocks that leak. When my miniT shocks leaked i used that between two seal and they never leaked again. Its good stuff just a little expensive.

Mr. Mugen

I got 10 tubes of it for 10 bucks on the bay. Still have plenty left.

Kevin

westphill24

@ Muck yeah there ball diffs

Whats this green slime stuff? I was using the AE diff lube but Im always open to trying new things.

maxxin2.5

i used automotive bearing grease to!
havent gotten to use it but it seems really good.. i didnt get to put a lot in because my dada wouldnt let me but it seems really good

brainleak

My Feedback: (1)

AE makes it Its called Green slime, One sec I'll grab a link

http://order.aeteam.net/product_deta...?Itemcode=1105

MMT GUNS

Yes it contains Kevlar it works grate.