Building small racer, need parts!
#1
Senior Member
Thread Starter
Join Date: Feb 2005
Location: Winnipeg, MB, CANADA
Posts: 401
Likes: 0
Received 0 Likes
on
0 Posts
Building small racer, need parts!
O.K. I started to design my small carpet car, it will look like a small Knife or Scalpel but palm size, what I need are some foam or rubber tires/rims, fatter ones for the back. What are the smallest out there that are good? This is basically the only thing holding me back from building the car. I guess something around the 1" mark would work well.
#5
Senior Member
Thread Starter
Join Date: Feb 2005
Location: Winnipeg, MB, CANADA
Posts: 401
Likes: 0
Received 0 Likes
on
0 Posts
RE: Building small racer, need parts!
I thought of making my own but didn't know what to use for the foam. I was going to look into the Mini-Z stuff but have not had a chance to get down to the LHS, not even sure if they would have that stuff. How big are the Mini-Z ones and how wide?
#7
Member
Join Date: Jun 2006
Location: Stillwater,
OK
Posts: 73
Likes: 0
Received 0 Likes
on
0 Posts
RE: Building small racer, need parts!