vandetta gearing
#1
Senior Member
Thread Starter
My Feedback: (7)
Join Date: Mar 2003
Location: BONNEY LAKE,
WA
Posts: 108
Likes: 0
Received 0 Likes
on
0 Posts
vandetta gearing
I just ordered an Ammo 28-35-5100 Brushless motor and noticed that the shaft size is 3.2mm. Who carries a pinion gear that will fit the motor that is the same pitch? Should I make any gearing changes? I will be just playing on the street and have 6 cell 1400mah nimh and soon some li-po's 2 or 3 cells..
Thanks
Thanks
#2
Senior Member
Join Date: Jan 2004
Location: Olympia,
WA
Posts: 612
Likes: 0
Received 0 Likes
on
0 Posts
RE: vandetta gearing
I'm told Robinson Racing "48P Metric" gears will work.
jaejw1 likes 19/45 pinion/spur on the vendetta with his permax, which is close to the same kv as that motor. Just keep an eye on the motor and ESC temps. Motor should be 150F or lower to be truly happy.
jaejw1 likes 19/45 pinion/spur on the vendetta with his permax, which is close to the same kv as that motor. Just keep an eye on the motor and ESC temps. Motor should be 150F or lower to be truly happy.