Tek 18 pavement pounder revised
#1
Member
Thread Starter
Join Date: Feb 2007
Location: bayshore,
NY
Posts: 58
Likes: 0
Received 0 Likes
on
0 Posts
Tek 18 pavement pounder revised
Many of you have seen this car in its old form.... here is my all new custom setup! please let me know what you think
Link to the previous setup>>> http://www.rcuniverse.com/forum/m_76...tm.htm#7647310
Here the specs
TEAM ASSOSIATED RC18T
Novak Mongoose micro pro 13.5 6000kv esc motor combo
Novak blue aluminum pinion 14-19t (on thier way)
Airtronics 94761z metal geared digital servo
X-ray m18 servo saver
custom made 3s2p max amps 1720 mah lipo
Deans connector
sr3500 micro recieve with custom lexan antena
MIP front heavy duty spool with toyz steel gears
MIP rear super diff with toyz steel gears
My own custom made carbon fiber driveshaft
Exotec TEk18 chassis Gunmetal diff covers
Exotek aluminum Tek 18 slipper clutch
Exotek 57t slipper spur
Exotek aluminum gear cover Gunmetal
Exotek aluminum 0degree rear hinge pin gunmetal
Exotek front and rear carbon fiber shock towers
3racing shocks mounted custom towards inside of vehicle!!! running TA 80 wt oil with one hole dampners and hard gold springs. rear shafts have been changed to front to loower veh is lowered to a 1/4 inch ride height this is set up to tear up pavement!!
Driven productions delrin hex adapters
Jaco prism 1/10 purple foams
Rpm arms reveresed for an extra 1/2" wheelbase!!!
Buggy 18b wing mounts with a carbon fiber look niteline wing
and heres the pics
enjoy
Heath
Link to the previous setup>>> http://www.rcuniverse.com/forum/m_76...tm.htm#7647310
Here the specs
TEAM ASSOSIATED RC18T
Novak Mongoose micro pro 13.5 6000kv esc motor combo
Novak blue aluminum pinion 14-19t (on thier way)
Airtronics 94761z metal geared digital servo
X-ray m18 servo saver
custom made 3s2p max amps 1720 mah lipo
Deans connector
sr3500 micro recieve with custom lexan antena
MIP front heavy duty spool with toyz steel gears
MIP rear super diff with toyz steel gears
My own custom made carbon fiber driveshaft
Exotec TEk18 chassis Gunmetal diff covers
Exotek aluminum Tek 18 slipper clutch
Exotek 57t slipper spur
Exotek aluminum gear cover Gunmetal
Exotek aluminum 0degree rear hinge pin gunmetal
Exotek front and rear carbon fiber shock towers
3racing shocks mounted custom towards inside of vehicle!!! running TA 80 wt oil with one hole dampners and hard gold springs. rear shafts have been changed to front to loower veh is lowered to a 1/4 inch ride height this is set up to tear up pavement!!
Driven productions delrin hex adapters
Jaco prism 1/10 purple foams
Rpm arms reveresed for an extra 1/2" wheelbase!!!
Buggy 18b wing mounts with a carbon fiber look niteline wing
and heres the pics
enjoy
Heath
#5
Member
Thread Starter
Join Date: Feb 2007
Location: bayshore,
NY
Posts: 58
Likes: 0
Received 0 Likes
on
0 Posts
RE: Tek 18 pavement pounder revised
Maxxin - i was using the mamba micro pro esc and 5400 before.... this is 600 kv more and due to the larger can and shaft has way more torque! this is intended for much heavier 1/16th! this will give me around an extra 7200rpm at 11volts and will enable me to run 17-19t pinions mayube more and still be underworked!
Rcdude 4051 - thanks my friend!
Fasterrcs - i was runing high 40's low 50's with the old mamba setup and a 16t pinion now i plan to run 19t or better and i will have an extra 7200 rpms overall so this should net me well into the 50"s easy
If you guys want to check out tons of pics of the build you can see them here -
http://forums.thetoyz.com/index.php?showtopic=6924&hl=
heres a few extra of Betsy completed.... just waiting for the new novak pinions and some body supplies
thanks guys!
Heath
Rcdude 4051 - thanks my friend!
Fasterrcs - i was runing high 40's low 50's with the old mamba setup and a 16t pinion now i plan to run 19t or better and i will have an extra 7200 rpms overall so this should net me well into the 50"s easy
If you guys want to check out tons of pics of the build you can see them here -
http://forums.thetoyz.com/index.php?showtopic=6924&hl=
heres a few extra of Betsy completed.... just waiting for the new novak pinions and some body supplies
thanks guys!
Heath
#7
Member
Thread Starter
Join Date: Feb 2007
Location: bayshore,
NY
Posts: 58
Likes: 0
Received 0 Likes
on
0 Posts
RE: Tek 18 pavement pounder revised
Thanks my friend! Just waiting on my pinion sets.... and some body supplies then i can get her running and the body painted
Heath
Heath