>Project - TEK18X2SE - 2wd - 1:18<
#1
Thread Starter
Join Date: May 2005
Location: Stockholm, SWEDEN
Posts: 228
Likes: 0
Received 0 Likes
on
0 Posts
>Project - TEK18X2SE - 2wd - 1:18<
Been a while since i visited the RCU, but i thought i would share my pics from my upcoming project.. Since i have a long way to my local track, i spend some time in my hobbyroom. Not sure if ya seen my other car, my 2wd converted BJ4WE (1:10 - 4wd car)
Since i race the TEK18Xb car i thought it could be fun to test a 2wd car..seen some friends doing some Mini-Slider conversion and they look´s awsome!!..
My car is based on the ace TEK18X car, Motormount and its mounting holes + tranny (slipper and rear) AERC18 rear tranny,arms,hubs and cvd´s. - The front is Losi´s Mini-T in this case, im suing GPMs blu alloy, with Integys brace(conection front/chassi) . A topdeck will be made, as its bigger brother...my goal is to get this one to look as the bigger one.
This is the inventory list, but a smaller update have been done..a lot of parts..and more is ordred
Front end is attached.. (it looks wide, but is same as the TEK18X
Made my own foams, from JACO pinks and RPM rims
Main chassi is rough cut...
To bad i miss a spurgearclamp for the slipper, but will pick up one today..a update will be this weekend
Enjoy!!
Since i race the TEK18Xb car i thought it could be fun to test a 2wd car..seen some friends doing some Mini-Slider conversion and they look´s awsome!!..
My car is based on the ace TEK18X car, Motormount and its mounting holes + tranny (slipper and rear) AERC18 rear tranny,arms,hubs and cvd´s. - The front is Losi´s Mini-T in this case, im suing GPMs blu alloy, with Integys brace(conection front/chassi) . A topdeck will be made, as its bigger brother...my goal is to get this one to look as the bigger one.
This is the inventory list, but a smaller update have been done..a lot of parts..and more is ordred
Front end is attached.. (it looks wide, but is same as the TEK18X
Made my own foams, from JACO pinks and RPM rims
Main chassi is rough cut...
To bad i miss a spurgearclamp for the slipper, but will pick up one today..a update will be this weekend
Enjoy!!
#3
Thread Starter
Join Date: May 2005
Location: Stockholm, SWEDEN
Posts: 228
Likes: 0
Received 0 Likes
on
0 Posts
RE: >Project - TEK18X2SE - 2wd - 1:18<
So, this is some testmount pictures...so do not think about the shocksprings etc..not sure yet if im gonna use Losis or AE...my TEK18Xb is using AE shocks, think that colud be good to sue the same...
But this is a how it almost be looking..
But this is a how it almost be looking..
#6
Thread Starter
Join Date: May 2005
Location: Stockholm, SWEDEN
Posts: 228
Likes: 0
Received 0 Likes
on
0 Posts
RE: >Project - TEK18X2SE - 2wd - 1:18<
The tires are small :/.. and IRL the car have the right propotional (spelling). No this is a custommade (handmade/dremel) chassi specefic for this car.
glad ya like it.
glad ya like it.
#13
Member
Join Date: Mar 2005
Location: St.Clairsville,
OH
Posts: 39
Likes: 0
Received 0 Likes
on
0 Posts
RE: >Project - TEK18X2SE - 2wd - 1:18<
What is the wheelbase? I really like the look of an 1/18th 2wd buggy, I have several Mini-T's laying around and may order up a Slider chassis to do a conversion.
#15
Thread Starter
Join Date: May 2005
Location: Stockholm, SWEDEN
Posts: 228
Likes: 0
Received 0 Likes
on
0 Posts
RE: >Project - TEK18X2SE - 2wd - 1:18<
Recived a copy of the speedpassion (that il recive tommorow) i mounted the replica in my 2wd car... just over 500gr rtr with body
talk about difference in weight and size vs Novak
talk about difference in weight and size vs Novak
#16
Senior Member
Join Date: Jan 2007
Location: vacaville,
CA
Posts: 1,968
Likes: 0
Received 0 Likes
on
0 Posts
RE: >Project - TEK18X2SE - 2wd - 1:18<
haha yeah those hobbywing bl setups are becoming quite popular..
also you should sell these chassis..
they looks great.
you said you custom made the chassis correct?
you shyould sell a kit like thing that come with everything to convert your rc18t to this or mini t to this.. seems very cool.
also i think you should put some jacos on there..but idk if jacos can be put in the front
also you should sell these chassis..
they looks great.
you said you custom made the chassis correct?
you shyould sell a kit like thing that come with everything to convert your rc18t to this or mini t to this.. seems very cool.
also i think you should put some jacos on there..but idk if jacos can be put in the front
#17
Thread Starter
Join Date: May 2005
Location: Stockholm, SWEDEN
Posts: 228
Likes: 0
Received 0 Likes
on
0 Posts
RE: >Project - TEK18X2SE - 2wd - 1:18<
Thanx Maxxin, i just recived the SpeedPassion bl combo..just like the hobbywing but double the price..but there seems to be some more adjusting and it can handle more Amps..
Well after 6 packs, im not sure i want to "start" selling, but my goal is to have 1 more chassi..thats what i said about this car bigger brother, but not sure on that anymore...but this one, i will produce one more of. at least..
some new paint on the GB-Concepts body..
Well after 6 packs, im not sure i want to "start" selling, but my goal is to have 1 more chassi..thats what i said about this car bigger brother, but not sure on that anymore...but this one, i will produce one more of. at least..
some new paint on the GB-Concepts body..
#19
Banned
Join Date: Sep 2008
Location: Los Angeles,
CA
Posts: 588
Likes: 0
Received 0 Likes
on
0 Posts
RE: >Project - TEK18X2SE - 2wd - 1:18<
ORIGINAL: maxxin2.5
also you should sell these chassis..
they looks great.
you said you custom made the chassis correct?
you shyould sell a kit like thing that come with everything to convert your rc18t to this or mini t to this.. seems very cool.
also you should sell these chassis..
they looks great.
you said you custom made the chassis correct?
you shyould sell a kit like thing that come with everything to convert your rc18t to this or mini t to this.. seems very cool.
With all the "time" he has involved in a one-off, and all the custom bits and pieces, you probably don't want to know the bottom line.
Customs are great if you're doing them for yourself, but considering the effort that goes into one it's hard for anyone that's never done one to contemplate their true value.
#20
Thread Starter
Join Date: May 2005
Location: Stockholm, SWEDEN
Posts: 228
Likes: 0
Received 0 Likes
on
0 Posts
RE: >Project - TEK18X2SE - 2wd - 1:18<
DettaDude, is right...it wont be free..but it wont be astronomic, IF there is another chassi up for sale...the first one, is kind of a "prototype"...the main goal with this car aint the driving..it was to build it..But it handles good in my opinion,and i might do one or 2.
SO, just wait and see, hopfully i can test it more coming and weekend after it..
SO, just wait and see, hopfully i can test it more coming and weekend after it..
#21
RE: >Project - TEK18X2SE - 2wd - 1:18<
It looks like TeamLosi will be crossing the finish line first; followed closely by Associated, as always. I have plenty of TeamLosi decals if you want me to send you a couple. It looks like you are all out. Haha, I'm just kidding.
#22
Senior Member
Join Date: Jan 2007
Location: vacaville,
CA
Posts: 1,968
Likes: 0
Received 0 Likes
on
0 Posts
RE: >Project - TEK18X2SE - 2wd - 1:18<
i know your right but i have seen a couple peoplethat start their own company and stuff..
like cowrc doesnt he makehis own stuff and ripper7racing.. idk it was just athought
like cowrc doesnt he makehis own stuff and ripper7racing.. idk it was just athought
#23
Banned
Join Date: Sep 2008
Location: Los Angeles,
CA
Posts: 588
Likes: 0
Received 0 Likes
on
0 Posts
RE: >Project - TEK18X2SE - 2wd - 1:18<
ORIGINAL: maxxin2.5
i know your right but i have seen a couple peoplethat start their own company and stuff..
like cowrc doesnt he makehis own stuff and ripper7racing.. idk it was just athought
i know your right but i have seen a couple peoplethat start their own company and stuff..
like cowrc doesnt he makehis own stuff and ripper7racing.. idk it was just athought
#24
Thread Starter
Join Date: May 2005
Location: Stockholm, SWEDEN
Posts: 228
Likes: 0
Received 0 Likes
on
0 Posts
RE: >Project - TEK18X2SE - 2wd - 1:18<
4 more packs with the lowbudget motorsystem EZrun..i have the 7800rpm/v version and i must say, wow, maybe not as the Novak in feeling, but prety close . The car handles better, but i hav e to work on my setup..
The car have now sick good lowspeed steering, and little underster in highspeed(as i want)..
I must work "off" some lowspeed steering. any ideas
The car have now sick good lowspeed steering, and little underster in highspeed(as i want)..
I must work "off" some lowspeed steering. any ideas