KK Needle valve for TD.049
#26
Thread Starter
Join Date: Jan 2005
Location: Oakville,
ON, CANADA
Posts: 248
Likes: 0
Received 0 Likes
on
0 Posts
Hi skaliwag,
Check out your local Craft Brewery. (water, grain, yeast, hops)
I'll bet they are busy too!
I am lucky to have several LHSs to spend my money.
Picking through balsa racks is my 'other' hobby !
MJD, They know I have a list. Every LHS I've been to, has something I want!
And, are more than willing to order what I want, for me.
Ever since 'childhood' , I have 'put away' every week some money. Hobby money. For me, one day, to enjoy.
Back then, money was hard. Now, time is expensive.
I still think building is half of the fun, flying model airplanes.
(And they have to carry at least one #64 rubber band aloft ! ! !)
Cheers my Friends,
Take care,
Have fun,
Dave'crosscheck'Fallowfield
Maac 6437
Unabashed Combat Team
Check out your local Craft Brewery. (water, grain, yeast, hops)
I'll bet they are busy too!
I am lucky to have several LHSs to spend my money.
Picking through balsa racks is my 'other' hobby !
MJD, They know I have a list. Every LHS I've been to, has something I want!
And, are more than willing to order what I want, for me.
Ever since 'childhood' , I have 'put away' every week some money. Hobby money. For me, one day, to enjoy.
Back then, money was hard. Now, time is expensive.
I still think building is half of the fun, flying model airplanes.
(And they have to carry at least one #64 rubber band aloft ! ! !)
Cheers my Friends,
Take care,
Have fun,
Dave'crosscheck'Fallowfield
Maac 6437
Unabashed Combat Team
#29
Thread Starter
Join Date: Jan 2005
Location: Oakville,
ON, CANADA
Posts: 248
Likes: 0
Received 0 Likes
on
0 Posts
Whoo Hoo!
My LHS got a (Thanks Bernie!) Cox International piston reset tool ! Within a week !
Way better than the lost gr.9 Machine Shop one I made! ! ! Sweet !
Asking Santa for some 50% Nitro Fuel for Christmas...
Just thinking about 1/2A C/L Proto makes me 'dizzy'...
Where, can I put the #64 rubber band???
Cheers my Friends,
Take care,
Have fun,
Dave'crosscheck'Fallowfield
Maac 6437
Unabashed Combat Team
My LHS got a (Thanks Bernie!) Cox International piston reset tool ! Within a week !
Way better than the lost gr.9 Machine Shop one I made! ! ! Sweet !
Asking Santa for some 50% Nitro Fuel for Christmas...
Just thinking about 1/2A C/L Proto makes me 'dizzy'...
Where, can I put the #64 rubber band???
Cheers my Friends,
Take care,
Have fun,
Dave'crosscheck'Fallowfield
Maac 6437
Unabashed Combat Team
#30
Use the rubber band to hold the lines on the reel when you are finished flying. I started up my 1/2A Proto yesterday with the CS motor from around 1990. It was running about 20,000 rpm. I made a new Turbo plug head for it and it went 27,000. Another GZ (newer model of the CS) only got 21,000, up from 17,000 but not too good. I want to make an F2D proto speed like in the Northwest. They use old combat motors which rev up to 30,000 rpm no problem. I have no place to fly them except maybe Niagara Falls. 4 hours at least. or put on 2 1/2" wheels.