J3 Cub in marketplace any good?
#1
J3 Cub in marketplace any good?
http://www.rcuniverse.com/market/item.cfm?itemId=52134
Has anybody tried this plane? 47" wingspan, 30" long, everything included, etc. For $55 and ARF it seems like a steal! I have a Norvel .074 handy, would it do the job?
Has anybody tried this plane? 47" wingspan, 30" long, everything included, etc. For $55 and ARF it seems like a steal! I have a Norvel .074 handy, would it do the job?
#2
RE: J3 Cub in marketplace any good?
I think an .074 would do nicely. The one in the picture I attached is about the same size and it flies fine with a Norvel .061.
I wonder why it comes with a 380. I see a fuel tank and engine mount in the picture.
I wonder why it comes with a 380. I see a fuel tank and engine mount in the picture.
#4
Senior Member
My Feedback: (31)
Join Date: Jul 2003
Location: Houston,
TX
Posts: 846
Likes: 0
Received 0 Likes
on
0 Posts
RE: J3 Cub in marketplace any good?
This guy is only 20 miles from the house, maybe I should go get one for a 'review'.....
Yeah that's the ticket, a review on RCU, that's what I'll tell her when she catches me with it.....
MUST....RESIST....CUB....
Duke
Yeah that's the ticket, a review on RCU, that's what I'll tell her when she catches me with it.....
MUST....RESIST....CUB....
Duke
#5
RE: J3 Cub in marketplace any good?
Thanks for the replies. I'll get it on my next paycheck. I emailed the guy and asked a few questions, here's the latest email:
"first of all good morning to you, i hope i can be as
helpful as possible, regarding the j3 cub, its a very
good model and on the airfoil the bottom is flat,
there are wholes cut out in the horizontal stabelizer
and the fuse is basiclly stick and ply. very
nice,except the sides of the plane dont have windows
,only the front windshield is available but if you
want it to have windows on the sides,its not that bad
at all you know. it takes speed 400 and 4 servos .
thanks again neil"
No windows on sides: That made me wonder because the first pic shows windows. Notice that the wing number is NC81866. Now look at the other two pictures - those are NC81855. In one of the NC81855 pics, where it shows the entire airplane plus a bag of accessories, a close look shows that there are no side windows, only the square opening for the windsheild. So in the email I think he was referring to the NC81855 plane. I just got a Futaba Skysport tx on ebay for $25 so I think I'll use these!
Rog- just goes to show how cheap stuff really is - and how much it costs to get all this stuff from a 'brand name'.
"first of all good morning to you, i hope i can be as
helpful as possible, regarding the j3 cub, its a very
good model and on the airfoil the bottom is flat,
there are wholes cut out in the horizontal stabelizer
and the fuse is basiclly stick and ply. very
nice,except the sides of the plane dont have windows
,only the front windshield is available but if you
want it to have windows on the sides,its not that bad
at all you know. it takes speed 400 and 4 servos .
thanks again neil"
No windows on sides: That made me wonder because the first pic shows windows. Notice that the wing number is NC81866. Now look at the other two pictures - those are NC81855. In one of the NC81855 pics, where it shows the entire airplane plus a bag of accessories, a close look shows that there are no side windows, only the square opening for the windsheild. So in the email I think he was referring to the NC81855 plane. I just got a Futaba Skysport tx on ebay for $25 so I think I'll use these!
Rog- just goes to show how cheap stuff really is - and how much it costs to get all this stuff from a 'brand name'.