RCU Forums - Analog vs. Digital Servo Use

RCU Forums (https://www.rcuniverse.com/forum/)

- "1/2 A" & "1/8 A" airplanes (https://www.rcuniverse.com/forum/1-2-1-8-airplanes-70/)

- - Analog vs. Digital Servo Use (https://www.rcuniverse.com/forum/1-2-1-8-airplanes-70/11431466-analog-vs-digital-servo-use.html)

Steve Westphal

03-04-2013 04:24 PM

Analog vs. Digital Servo Use

I know this been asked before but I am, in a bind right now. I have an HOB ME 109 that is ready for radio installation and have a question: I am using 3 digital servos and I need one more....can I use an analog servo alongside the digital ones? It sure would make it a lot easier(and cheaper.

soarrich

03-04-2013 04:43 PM

RE: Analog vs. Digital Servo Use

Yes you cab mix them.

hllywdb

03-04-2013 04:58 PM

RE: Analog vs. Digital Servo Use

Depends on the reciever. Some recievers when set up for digital servos, do not behave well with anolog. I would think that if your reciever does not switch between the two, you may be ok.

soarrich

03-04-2013 05:03 PM

RE: Analog vs. Digital Servo Use

The hi end Futaba 2.4 Rx don't like them mix, but I don't think he's running a $200 Rx in a HOB Me 109.[X(]

mick1404

03-07-2013 04:55 AM

RE: Analog vs. Digital Servo Use

I cant see any issues mixing servos like letting the magic smoke out of your radio gear and as written above, it depends on your RX, try it out, it will either work or it won't.

All times are GMT -8. The time now is 02:51 PM.