Glo Bee Aquisition to share
 

I recently obtained some 049 Glo Bee 1.5 volt plugs with adapter heads and gaskets for Cox 049/051, Norvel 049/061 and would like to share them with my fellow 1/2A fanatics. I do need some opinion. Should I post them on the classifieds or just just let yall know here and ask like $10.00 plus a little shipping . I am not looking to make a profit ,just want to recoup my investment and share the good fortune.

RE: Glo Bee Aquisition to share
 

If those are the ones I'm thinking of, with the spiral wound element, I'd be interested in maybe a couple-three...:D

RE: Glo Bee Aquisition to share
 

Here is a photo, I have 7 to sell . Of course they will come with a gasket also.

RE: Glo Bee Aquisition to share
 

ill take one if you have any left

RE: Glo Bee Aquisition to share
 

OK Gabe. Looks like I have 3 left now.

RE: Glo Bee Aquisition to share
 

ok one is mine

RE: Glo Bee Aquisition to share
 

If you have any left I will take one. Send me a PM and your address and I will send you a check and my address. I have a TD with the Glo-Bee head. I would like to have a spare.
John Smith

RE: Glo Bee Aquisition to share
 

That makes 2 left and counting.

RE: Glo Bee Aquisition to share
 

Unless I have a cancellation it looks like only one left. Unless you can talk me out of mine.
It shouldn't be too hard since I really can't afford not to sell it. :eek:

RE: Glo Bee Aquisition to share
 

I finally got around to testing one of these GloBees on my new Cox Baby Bee today. It took a lot of amps to get it to glow but once it lit it ran great. I think I gained a little over stock but I need to make some more base line runs to be certain. Aldon at Merlin Plugs says the GloBees give a modest compression increase over stock heads. I would have done some more testing but it is a little chilly out there. :)