Enya 45CX dies?
Hey All
Man I sure hope someone can help! I got a used Enya 45 CX Model 6201 that the man said ran perfect 6 months ago before he stored it in a bag. Anyway, it was completely clogged and would not take prime. I spent a couple hours with a turkey baster and fuel tubing to open the needle valve and I took out the idle mixture screw. I've got good priming and it'll start right up. It has a nice low idle for as long as I want, has great top end with high speed needle out 1 1/4 turn, but dies when going from idle to high speed quickly. I'm thinking maybe I should have left the idle mixture screw alone but it's too late. The engine is on a test stand and I am letting it cool down and just backed the idle mix screw out 1/2 turn thinking it might be too lean. I don't know?
I'm running 10% CoolPower and an OS #8plug with 11 x 6 MAS.
THIS CRAP ENDS TODAY!!!!!!
Any ideas are greatly appreciated
Scotty