RE: are these blades any good for cp pro?
Happy Thanksgiving everyone.
Mark,
Sorry you have to work today. Work was pretty slow for me today, so that was enjoyable.
Yeah, I have powerpoles on both sides of the ESC. Yeah, I removed the bullet connectors. I used the 45A connector on the ESC wires and the 35A connector on the motor wires, since those are smaller. I had some bullet connectors on my ESC for another motor and they were too short for the Scorpion connectors. That made part of the motor connector exposed. It worked for a long time, but that exposed part was really close to a CF plate and the metal boom. That was a short waiting to happen, but I made sure the connector never touched those parts. I really dislike soldering thick wires, so this was an easy fix. I crimped the connectors on with the ESC and motor still attached to the heli, so it was kind of hard to get the crimper in there. I spooled it up last night and there wasn't any problems.
Nick