RCU Forums - View Single Post - ESM FW D-9
Thread: ESM FW D-9
View Single Post
Old 03-12-2012, 02:53 PM
  #1416  
kahloq
 
kahloq's Avatar
 
Join Date: Jan 2006
Location: Fort Collins, CO
Posts: 4,295
Likes: 0
Received 1 Like on 1 Post
Default RE: ESM FW D-9


ORIGINAL: Velco
.

As there is no good Do 335 thread (at least I could not find it) I have some interesting options for that modell too as I consider the suggested 2 Eflite160 on 10S and 20x10 completely unnecessary and the plane sounds very bad with those props spinning at such high revs.

A question from my side, which way to go, Benedini or Model Sound Inc way? Some pro and contra from the filed would be nice.

Velco
Ummm.... there is definitely a good esm do 335 thread headed up by Fockewulf37. In it there are a few examples on electric versions and there has been one done with two power 160's. But..yea its quite overpowered and could be flown with power 60s or power 90s with smaller props. A bendini sound system would definitely make it sound nice, but ive no experience with Model Sound Inc.

Thread here:
http://www.rcuniverse.com/forum/m_10..._1/key_/tm.htm