View Single Post
Old 07-14-2012, 06:52 AM
Join Date: Nov 2007
Location: Fritch, TX
Posts: 2,060
My Gallery
My Models
My Feedback
Default RE: AJ-2 Construction Revisited

About 6 ounces of clear coat was mixed for application. Roughly 2 ounces of fast reducer was added.

An inexpensive spray gun was used to apply the clear coat. The pressure was set at 30 psig.

A very light coat was applied initially. This was allowed to dry about 10 minutes. This was followed by several more coats. Just keep spraying until the surface is shinny. then stop.
Attached Thumbnails Click image for larger version

Name:	Qo39799.jpg
Views:	30
Size:	114.1 KB
ID:	1781722   Click image for larger version

Name:	To45056.jpg
Views:	50
Size:	81.0 KB
ID:	1781723   Click image for larger version

Name:	Uz68670.jpg
Views:	27
Size:	88.8 KB
ID:	1781724  
sahartman21 is offline