RE: Model Aircraft Starting Bench (GSWAM Style)
Made a minor revision to the plans, added 1-3/4" to the length of PN 6.PN 6 is the board in the center of the bench. At our field I just moved it a few inches to the rear on some of our benches. Still trying to find the optimum size for that part. I have a pdf of the revised plans, but for some reason RCU won't let me upload it. Comments and suggestions are welcome.
If you have an old design, or if you need more length, you can move PN 6 up to 5" to the rear as shown in the picture below.
Found out that my upload problem was due to an Internet Explorer problem. Switched over to Chrome.
Here are the revised plans along with the design goals: