RCU Forums - View Single Post - balancing ultimate with swept back wing
View Single Post
Old 01-29-2015, 08:13 AM
  #1  
jjoos99
My Feedback: (12)
 
Join Date: Dec 2001
Location: Yellow Springs, OH
Posts: 389
Likes: 0
Received 0 Likes on 0 Posts
Default balancing ultimate with swept back wing

I am confusing myself on balancing my goldberg ultimate. I blueprints show the balance point being 2.5in back from the leading edge. If that measurement is taken at the very center of the wing with the wing being a swept wing the measurement would not be the same at the sides of the fuse where my balancer pads rest. Am I right in my thinking? It might be 1.5 inches 4inches out from the centerline of the wing with the way the wing swept back. I just need to confirm my thinking.
thanks
Jeff