Got back from FL yesterday and did some more work on the Dauntless today. Had the retract units with the Kraft wheels on mounted in the frame and forgot to take a pictures. I made up the wheel well rings and sanded them down level with the top ribs. Can't get a picture now with the wheel well rings in place. Don't want to cut the rings at all until they're glued to the top sheeting. I epoxied in my retract mounts and made up some hardwood supports to strengthen the whole area. Took a picture of the HK retracts with the struts I'm using. Need to pickup some carpenter's glue to glue together my 1/16 sheets for the sheeting. Need some gorilla glue for my Aerotech Sea Fury kit too.