..but don't worry I am drawing up the model as I go. And I plan to pull a mold or at leasy a plug from the canopy. So the 1/2A version can be repro'ed.
I had it set up in the front end for a CX-11, but I'm putting that in the Goldberg Chipmunk instead. And I needed a quick & fun test bed to fly the MDS .15. So I'll fully sheet the wing, firm up as necessary here and there, shorten the aileron and use dual servos, battery and servos in rear of fuselage.
Shortened the nose 1" too, that will help the CG. Bet it still comes in at a decent weight, kit spec is 22oz. Engine and pipe is 7.3 oz.