Originally Posted by
tailskid
I am assembling a VQ Dauntless AND going with my 9303 also!
I'm having a lot of trouble getting the air brakes to be activated by flaps, or the flaps activating the brakes.
I can can get the flaps to work on Ch 6 and the brakes on Aux 2. I programmed the "Px-6" to have Aux 2 as Master and Flaps as slave....but when I flip the Aux2 switch, only the brakes move!
Help!
Jerry
I have my radio set up this way:
Mix-6
Aux2 to flap
Pos0 69%
100%
Pos1 +100%
+125%
Offset- 90
Of course, these setting have to be fine tuned for your plane.