Ok, good info. I looked and I could literally move the batt to the front edge of the stab. With the OS .32 it seems like the batt pack was near the back of the wing saddle area so I'm thinking a 35 might not require extra weight.
I think I was using an 8x7 and 8x8 prop on the .32 it appeared to be faster than a DC Doddger I have with a YS 45re and a marine pipe. Hard to say though, the Toni is a lot smaller than a Q500 plane and I know that deceiving.
Im going to look at the dimension of the Jett 35 and see how much of the front of the plane I will have to emilinate
