RCU Forums - View Single Post - Build a Wood Q500 Fuselage
Thread
:
Build a Wood Q500 Fuselage
View Single Post
04-15-2017, 12:38 PM
#
28
sahartman21
Join Date: Nov 2007
Location: Fritch, TX
Posts: 2,060
Likes: 0
Received 0 Likes on 0 Posts
Build a Wood Q500 Fuselage
The parts were placed between layers of peel ply and laid on the vacuum bag (4 mil thick piece of tarp).
The vacuum line was placed next to the parts. Paper towels were placed over the parts.
A seam of latex caulking was run around the parameter of the parts. A piece of tarp was placed on to seal the vacuum bag.
The vacuum pump was turned on. Mine is set to pull about 6" of Hg vacuum.
After verifying that there were not leaks, it was left to dry.
Attached Thumbnails
Reply
Like
sahartman21
View Public Profile
Send a private message to sahartman21
Find More Posts by sahartman21
View iTrader Profile