Cvd
New issue to work on. CVDs that are delivering the power to the front and rear diffs, have an O-ring that captures the pin. When putting the kit together, I kinda thought uneasy about Associated having a piece of rubber to keep the pin from flying out. After going from 4wd to 0wd, that uneasy feeling was right. The o-ring slipped out of the groove.....I'm going back to using a setscrew and metal ring to retain CVD pin. The o-ring will work fine, for about a year. After that time frame, it seems dry, and has lost it's elasticity. That's the story I'm going with.