RCU Forums - View Single Post - J'EN .54 diesel
Thread: J'EN .54 diesel
View Single Post
Old 09-21-2017, 08:06 AM
  #1  
RyanNX211
 
RyanNX211's Avatar
 
Join Date: Mar 2008
Location: Upper Arlington, OH
Posts: 122
Likes: 0
Received 1 Like on 1 Post
Default J'EN .54 diesel

Here's conversion done of a Chinese motor by Just Engine UK.
The venturi has been further restricted to 1/16 ID. The manifold was plumbed to the wheel and the plane is extremely clean. The project was the restoration of a silked Anderson built in 1990. Its covering was badly rotted and the balsa is brittle. Lots of Thermalspan patches and a single coat of Klass Kote.
On 20cc, it runs 12mins at about 3,900rpm. It gets really small!