Thanks 52Larry52. I'm keeping several of the S3004 servos, but I did buy a couple of Hitec HS-77BB's, as they are low profile. I couldn't line up the futaba ones (1/42" in height) with the pre-cut aileron holes in the hatch covers. Rather than make the cut-outs larger, I bought the low profile servos to align with the servo arm cut-outs. I'm now in the process of finish painting most of the plane. I also decided to turn the glare panel and attached windshield into a removable piece. I want access to the area below. I still need to configure a choke mechanism for the DLE 20RA gasser. Ultimately, the plane will have coast guard trim like the one shown attached as an image.