I do not understand how it can be at 60 amp draw still . The stock setup in the Carbon Z Cub where this motor came from was a 15 x 5.5 prop and it only had a 60 amp esc from stock
why is it that battery 6S3000 and motor being same and dropping 3 inch in diameter I would still have so much draw . I have never played with e calc just tried and did not find a place for just getting motor and prop numbers and do not find the e flite BL 50 on their list ... I do believe it is a 525 kv . Just hoping to build a cool project from my extra left over aircraft parts ...