Well, I'm all setup. Ready for maiden.
All 777 MKS servos on 7.2v
KIngtech 310 (280oz Fuel) 3 Tanks
DX20 with Cortex Gyro
UP3 for mains and doors
Electronic valves for canopy locks, speed brakes and brake, servo on canopy operation
Dry weight with UAT full 60.4 Lbs
CG @ 12" or 304mm from L/E but fall to the nose a little
I don't get a full 100mm out of the elevators, I get about 85 max. I'll need new horns and move the pivot point to get more if needed.