Ok guys new to the group! I need some direction if someone can help me out..... I'm in the last stages of my build and I'm trying to figure out these exhaust tubes and the correct/best way to install them. I haven't seen much talk of this or some good photos to guide me and as well Skymaster have made some updates to this particular item with poor manual diagram "note the angle" photo! poor . I have the Thrust tube that came with the model and is the angled tube as most have seen. My problem is from what I've seen in most photos and discussions the wooden ring does not allow me to align the tube in the orientation required on the main engine rail. Is there trimming required to mount this correctly? Can someone please display some build comments on this subject and some quality photos of the new updated G2 Thrust tube installation? Cheers Fellas