I have dusted this project off & I have it on my
bench.. Most of the design work is done. I have
to epoxy the engine/fuel tank boxes together &
cover them. Making forward firewall parts today
to allow for some out thrust.
I took 5 years off to get my full size plane
finished & flying. My RC buddy & I have been
flying a lot of scale foam electrics, Eflite P-51's,
Corsairs, Spitfires, etc, but we are getting back to
glow & gas. This is one of a few projects that I had
put away, but it is the one closest to flying so I'm
getting it finished first. After that will be a Sig Wonder
that I will build as twin with 2 OS ,10 FP's. After those
engines are broken in, I'll move them to an F-82 that I
am going to build from 2 House of Balsa .20 P-51 kits.
Also, I am glad to see these older threads still here. There
is a lot of knowledge & experience documented here that I
am glad has not gotten lost.
Too much fun!
John