RCU Forums - View Single Post - TF Beechcraft Bonanza F33A Build
Thread: TF Beechcraft Bonanza F33A Build
View Single Post
Old 07-01-2019, 09:57 AM
  #40  
VincentJ
 
VincentJ's Avatar
 
Join Date: Mar 2011
Location: Peterborough, NH
Posts: 4,582
Received 117 Likes on 107 Posts
Default


Trailing edge of the stab is sanded flush and readied for a final 1/8" thick cap strip.




Cap strip is glued and sanded .








The elevators halves went through the same procedure as did the stab. I thought I would show how I clamped the cap strips in place while the glue dries.




You can never have too many clamps!
Last edited by VincentJ; 07-01-2019 at 10:26 AM.
VincentJ is offline  
Reply Like