RE: Great Planes Building Board Modification
[&:]
Dear to all,
Over than 20 years, I built my airplanes in the kitchen, in my office, on my back yard... where ever I feel comfortable to glue the balsa sticks together... for good, but disregard wher I am, the building board must be level, flat, not for today but for many years come.
All of us , we feel good and satisfy if after all , the model we built is straight, the wing, the fin, the stabilizer..all got flat surface, and of course it will fly better. Then you don't mind to install a good control system in it....and model will last for a long time.
We had many experiences the bad and the good, please so don't squeeze a little money to buy a good building board, it just doesn't make senses.
Of course, we need to go for bugget for this hobby but not for building board.
You don't need to have 9 or 10 chanels radio with CPM to fly a model just need four chanels, with reasonable JR 8103 you can set up for up to 10 airplanes or helicopter with all kind of mixing. Saving money one thing to purchase another thing better.
Just some of 2 cents ideas.
T.Tiep