Firstly, give this page time to load, it has a few images on it! (about 600kb!)
Right....
I have just drawn up a
rear dual exhaust design in CAD for anyone whos interested. I dont know what the sizing is like. It should be about right! (this was orginally designed for the mad force, so size may vary, but you'd only need to change the length!
Some nice rendered shots...
If you want anymore info PM me or email me
It should be easy enough to make. Its done in stainless in those pics, but you could do it copper/brass/ali (anything you like) as well.
NOTE: It
is baffled so it should produce enough back pressure for the fuel tank.
BUT: I DO NOT CLAIM THIS IS A TUNED PIPE. IT MAY WELL REDUCE THE PERFORMANCE OF YOUR TRUCK!
But if you want it too look cool
then go ahead....
Hope some of you find it interesting. Please respond to this! What you like about it, dislike, any improvements etc
If you want the plans for this pipe (yes i have drawn them out!) PM or email me. I was going to post them here, but i would like to know who my plans are going to!
Cheers,
David
[b]THIS IS MY OWN WORK. COPYRIGHT IS MINE. DONT JUST TAKE THESE PICTURES, PLEASE SAY YOU WILL. [b]