RE: Sig 1/4scale C/W Cub build
Well I am finally getting around to posting some pics,
I have the fuse sides framed,sanded and ply doubler installed, I cut the door opening and reinforced the door and the opening. I also installed 1/64 ply gussets at all the joints on the open framework. I have built the Stabilizer and the elevator and sanded the edges to size, I still need to radius all the edges.
My wife is gone shopping and I gave her a list of stick stock to pick up so I can reinforce the cabin area to account for the open door mod. She just called and they do not have the sizes I need so I told her to get a larger size and I will run it thru my table saw. I will try to complete the cabin area and finish up the fuse and move on to the wings tomorrow.