3D Electric Flying! Discuss all aspects of Electric 3D RC flying here!

3DHobbyShop 58" Edge 540 and 59" AJ Slick

Reply

Old 02-05-2019, 01:33 PM
  #1  
3dmenace
Thread Starter
 
Join Date: Feb 2019
Posts: 2
Exclamation 3DHobbyShop 58" Edge 540 and 59" AJ Slick

Just picked up some used 3dHobbyShop builds for cheap off craigslist... very excited for my first 3dhs aircraft's. Bought them with no information on what the previous

59" AJ Slick and a 58" Edge 540

Need some advice as to what is the normal battery pack to run in these. 4s, 6s?

Edge has an Exceed-Rc Rocket series 4120-515kv (86MC451) with a Castle Phoenix Edge 75 (not sure if its been programmed or not)

Slick has a Exceed-Rc Monster Power 32 says 42-50 kv770 with a Castle Phoenix Ice 75 (again not sure if its been programmed)

I believe the slick is from 2011 and the edge is from around 2013? Visited all my local hobby shops and they are all phasing away from RC Aircraft and just doing primarily rc cars/trucks, so no one had an idea what the correct battery for these electronics were.

Not trying to get an overkill setup that'll run hot, just want a good cg and flight time.
Thanks -Josh
3dmenace is offline  
Reply With Quote
Old 02-10-2019, 12:13 AM
  #2  
3dmenace
Thread Starter
 
Join Date: Feb 2019
Posts: 2
Default

Talked with some more guys at the Arizona electric festival and im going with a 4s 4000mah and a 6s 3300mah. thanks all.
3dmenace is offline  
Reply With Quote

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off


Thread Tools
Search this Thread

Contact Us Archive Advertising Cookie Policy Privacy Statement Terms of Service