Josh Glavin ETOC video
#1
Thread Starter
My Feedback: (31)
Josh Glavin ETOC video
All three rounds of Josh's ETOC performance are available to view below. It's a 7 minute and change compiled video. We'll break it down and edit in the future for viewing each round individually.
We exceeded our 5 gigabyte data transfer bandwidth for the second day in a row on our website. Josh's ETOC video will be available again on 4/7/2005 in the PM from our website.
Hitec USA has a link to Josh's three rounds below. Same video.
[link=http://www.hitecrcd.com/MikesSpace/Favtory%20Pilot/ETOC.htm]Joshs ETOC Video[/link]
We exceeded our 5 gigabyte data transfer bandwidth for the second day in a row on our website. Josh's ETOC video will be available again on 4/7/2005 in the PM from our website.
Hitec USA has a link to Josh's three rounds below. Same video.
[link=http://www.hitecrcd.com/MikesSpace/Favtory%20Pilot/ETOC.htm]Joshs ETOC Video[/link]
#6
Senior Member
Join Date: Apr 2004
Location: Rochester,
NY
Posts: 663
Likes: 0
Received 0 Likes
on
0 Posts
RE: Josh Glavin ETOC video
That was awsome Josh ... It was better flying than the vp flying although the vp still was kinda neat ..I really engoyed your flights Josh great job keep it up
#8
Member
Join Date: Apr 2004
Location: leicester, , UNITED KINGDOM
Posts: 50
Likes: 0
Received 0 Likes
on
0 Posts
RE: Josh Glavin ETOC video
Josh, That flying was fantastic!!, in my opinion a much better flight than the winner, more precise and considered
Well done!
Simon
Well done!
Simon
#9
Thread Starter
My Feedback: (31)
RE: Josh Glavin ETOC video
Josh is flying a model he designed himself, it’s called the Evelox 3D. Little Screamers is offering the kit in several printed schemes with all the hardware, soon to be released.
All up flying weight is 7.8ozs. With a 32" wing span @ 244sq-in.
Equipped with two Hitec HS-55's, two Hitec HS-50's on aileron, Hitec HFS-05MS RX, Kokam 3S-340mAh Lithium Poly, Castle Creations Phoenix 10 ESC and Little Screamers Brushless Motor with a GWS 8/4 HD prop.
All up flying weight is 7.8ozs. With a 32" wing span @ 244sq-in.
Equipped with two Hitec HS-55's, two Hitec HS-50's on aileron, Hitec HFS-05MS RX, Kokam 3S-340mAh Lithium Poly, Castle Creations Phoenix 10 ESC and Little Screamers Brushless Motor with a GWS 8/4 HD prop.
#13
Thread Starter
My Feedback: (31)
RE: Josh Glavin ETOC video
ORIGINAL: Shortman
I like how you pulled out the control line harrier rolling circles haha.
I like how you pulled out the control line harrier rolling circles haha.
#14
Thread Starter
My Feedback: (31)
RE: Josh Glavin ETOC video
Ok, you guys went and did it now!!![&:] 5.6 gigabytes of data transfer bandwidth in about six hours time, that's a little over the daily MAXIMUM on this account... The ETOC video link is down until midnight, then the counter starts again.
#15
My Feedback: (21)
Join Date: Feb 2002
Location: Portland, Oregon
Posts: 5,966
Likes: 0
Received 0 Likes
on
0 Posts
RE: Josh Glavin ETOC video
Haha, yeah and I love how the guys sitting next to you Mike were like holy %^&*! And maybe it was just me but the croud seemed to go wild? Definately like your intro footage hahah!
#17
Thread Starter
My Feedback: (31)
RE: Josh Glavin ETOC video
ORIGINAL: theKAT
Found the link too late. Not working today either, BTW.
Found the link too late. Not working today either, BTW.
As a matter of fact the daily bandwidth is nearly used up already this morning, were broaching 4GB and it's only 6:46AM, the MAX per day is 5GB.
#20
My Feedback: (13)
Join Date: Dec 2001
Location: Columbus, OH,
Posts: 208
Likes: 0
Received 0 Likes
on
0 Posts
RE: Josh Glavin ETOC video
Mike,
Just tried it again and it works.
Kitman
Just tried it again and it works.
Kitman
ORIGINAL: mglavin
Kit
I just tried it again and it works for me... What happens?
ORIGINAL: Kitman
Hey Mike,
Tried it today and no luck. Joshie Great Job!
Kitman
Hey Mike,
Tried it today and no luck. Joshie Great Job!
Kitman
I just tried it again and it works for me... What happens?