Fliton 3D rogue motor mount
04-06-2007, 05:41 PM
#1
Junior Member
Thread Starter
Join Date: May 2006
Location: kinna, SWEDEN
Posts: 6
Likes: 0
Received 0 Likes
on
0 Posts
Fliton 3D rogue motor mount
Hi!
i just broken my outrunner motor mount on my fliton 3D rogue, and i can't fix it.... can someone please give me the right messurments so i can build a new one! ore mabye someone running it whit a glow engine ore a inrunner can sell there outrunner mount to me! i have a inrunner mount that i can give back if someone is interested!
have a nice day!
i just broken my outrunner motor mount on my fliton 3D rogue, and i can't fix it.... can someone please give me the right messurments so i can build a new one! ore mabye someone running it whit a glow engine ore a inrunner can sell there outrunner mount to me! i have a inrunner mount that i can give back if someone is interested!
have a nice day!
04-07-2007, 02:21 PM
#2
Member
Join Date: Sep 2005
Location: Newcastle upon Tyne, UNITED KINGDOM
Posts: 45
Likes: 0
Received 0 Likes
on
0 Posts
RE: Fliton 3D rogue motor mount
Was it glued to the fuselage?
If not just email Fliton and they will send out you a new one. I managed to build mine wrong and I emailed them and they send me a new motor cage for $6.
Give it a shot!
If not just email Fliton and they will send out you a new one. I managed to build mine wrong and I emailed them and they send me a new motor cage for $6.
Give it a shot!
04-08-2007, 09:49 AM
#4
Junior Member
Thread Starter
Join Date: May 2006
Location: kinna, SWEDEN
Posts: 6
Likes: 0
Received 0 Likes
on
0 Posts
RE: Fliton 3D rogue motor mount
Hi, i have made my own motor mount.. now i just need the right lenght from firewall to motormount, left and right side.. so i get the same right thrust as original! can someone please take of ther nose and messure it!
05-11-2007, 07:29 PM
#5
Join Date: Feb 2004
Location: Oakland,
CA
Posts: 796
Likes: 0
Received 0 Likes
on
0 Posts
RE: Fliton 3D rogue motor mount
ORIGINAL: thebmxer
Hi, i have made my own motor mount.. now i just need the right lenght from firewall to motormount, left and right side.. so i get the same right thrust as original! can someone please take of ther nose and messure it!
Hi, i have made my own motor mount.. now i just need the right lenght from firewall to motormount, left and right side.. so i get the same right thrust as original! can someone please take of ther nose and messure it!
You probably have fixed it by now but firewall is 70mm on the left and 68mm on the right.
