RCU Forums

RCU Forums (http://www.rcuniverse.com/forum/)
-   3D Electric Flying! (http://www.rcuniverse.com/forum/3d-electric-flying-237/)
-   -   foamy plans (http://www.rcuniverse.com/forum/3d-electric-flying-237/7392288-foamy-plans.html)

Alabama Racer 04-19-2008 07:31 AM

foamy plans
 
Any suggestions as to where one can download some foamy plans?
I do not mind paying for the plans, just like to scratch build my
planes. I tried 3Dfoamy but could not get it to work.
thanks,
Brad

dystracted 04-19-2008 12:31 PM

RE: foamy plans
 
what size wingspan are you looking for? ill link you to two of my favorites, the morback and my current project the liptonic.the lipi is slightly smaller than the morback.im putting a eflight park 250 on a 2 cell 430 with the fuz 85% of the size shown on the plans.
ill just post a link to a thread with a bunch of free 3d plans.its got the knuffel,morback,and liptonic.all monoplanes.the link also has the smove bipe that almost everyone was using in f3p .

http://www.rcgroups.com/forums/showthread.php?t=550372

3DSAVAGE 04-19-2008 09:47 PM

RE: foamy plans
 
go to rcgroups.com and go to the scratchbuilt foamie section. it has all the plans you can imagine

Alabama Racer 04-20-2008 06:46 AM

RE: foamy plans
 
I am looking for a plane in the 32 - 36" range.
Thanks very much for the replies.

rmgmag 04-20-2008 05:20 PM

RE: foamy plans
 
Here's my favorite, I've built about 5 of them in various sizes.

http://www.rcgroups.com/forums/showthread.php?t=606425

Bob

Av8er Tim 04-22-2008 08:47 AM

RE: foamy plans
 
1 Attachment(s)
Bunch of free plans here www.foamyfactory.com Can't beat the 32" Mini 3DX. Still one of my favorites! I have plans posted here http://www.rcgroups.com/forums/showt...t=foamy+python for a 32" Pitts Python too. You can download the Python and Mini 3DX models for G3.5 over at the Knife Edge G3 downloads page.

Have fun!

Tim:D

kid chuckles 04-22-2008 08:43 PM

RE: foamy plans
 
Where do you get the foam? Those are cool looking planes Tim.


All times are GMT -8. The time now is 07:32 PM.