RCU Forums - View Single Post - New Video: HOW-To..3D maneuvers
View Single Post
Old 07-05-2006, 06:22 AM
  #41  
bubbagates
My Feedback: (32)
 
bubbagates's Avatar
 
Join Date: May 2004
Location: Elizabethtown, PA
Posts: 8,635
Likes: 0
Received 2 Likes on 2 Posts
Default RE: HOW-To..3D maneuvers


ORIGINAL: closetguy

BUBBAGATES
way to go, this could be a forum all on it's own,it's already help me out and thanks to
MIKE EAST for his video of the knife edge spin that may have got this started.

Thanks,

Like I mentioned in the very first post. I saw a ton of questions lately, all asking the best way to do this and that and felt having it all in one spot would be much easier.

Mike has contributed a ton of info. I'm looking at letting this run a couple of weeks, then start pulling posts together and make PDF files out of them, sort of a 3D how-to. Each maneuver description will have the customary "provided by" added to it and all of this will be compiled together, most likely with each maneuver having it's own heading.

So, with that being said, come on folks, tell us how you do it. It does not matter, just so long as you can reproduce it. Sometimes it might be best to tell us what plane you are doing it with. I have found certain planes need different entries into the same maneuver so knowing which plane will help.

If someone wants to do videos, both real time and sim based, that would also be cool