my own design edge
I did not take anything from any airplane except the real edge 540. I looked at pictures of it and went to the drawing board. The only thing I changed was obviously the flying surfaces cannot be scale in a funfly. I also wanted a longer tail moment than what other funfly's offer so the wing is 46.5 and the fuselage is 46, that is why it can wrap up within itself and 3d's better than any funfly I have flown, which is nearly every Morris, wasp, pizazz, magic 3d, and a couple others I cannot remember right now. I appreciate the positive comments and it has been a lot of work to create the instruction manual and full size plans. I started back in August and I am just about done with everything, that should tell you how much work it is, but I have enjoyed it. Jeff Williams