RCU Forums - View Single Post - Byron Wedell Williams Racer Build
View Single Post
Old 06-14-2008, 12:43 PM
  #52  
Rocketman612
My Feedback: (85)
 
Rocketman612's Avatar
 
Join Date: Jan 2002
Location: Enterprise, AL
Posts: 2,733
Received 6 Likes on 4 Posts
Default RE: Byron Wedell Williams Racer Build

Gremlin Castle thanks for the feedback.

derjager also responded with:

"Hi pete,

Have flown the WWR alot recently and am really enjoying it.

Last time I flew was at Joe Nall a few weeks ago, its on the front cover of the video and there is a feature on it as well.

I,m not sure of the incidence but it matches exactly the fairing so I would set it flush with the fairing.

Mine flies really well and does not balloon at full power. I think I said previously that the trim alters with the power setting.

At Joe Nall it was windy so landing was a handful in front of the cameras.

Best wishes

Steve "

I glued the aluminum rails in place with the wing incidence at 1 degree. The wood wing roots lined up with the fiberglass wing roots.
Will post photos later.

Thanks a bunch.
Pete