RCU Forums - View Single Post - HBK2 & Dx6i Settings, I'm Close
View Single Post
Old 10-12-2008, 03:53 PM
  #5  
jh1947
Member
 
Join Date: Jan 2008
Location: Hixson, TN
Posts: 43
Likes: 0
Received 0 Likes on 0 Posts
Default RE: HBK2 & Dx6i Settings, I'm Close

Here's how mine is set up
Hbk2 3900 10T W/ ESKY 25A ESC & 2200mah battery

-TN- / -TS
L 00.0% / 83.5%
2 23.5% / 67.0%
3 44.0% / 53.5%
4 66.5% / 70.5%
H 100.0% / 100.0%

-PN- / -PS
L 36.5% / 00.0%
2 45.0% / 25.0%
3 44.0% / 50.0%
4 75.0% / 79.0%
H 94.5% / 100.0%

TN = Throttle Normal & TS = Throttle Sport (idle-up)
Same Logic for PN & PS (pitch)
Do not fly 3d here, but do fly 95% of the flight in idle up mode.
Usually take off in normal mode & while in near hover or level FF transition to idle up.
Other way around for landing.
50% pitch = zero deg pitch while +/- 100% = +/- 10 deg pitch
in normal mode, the throttle setting shown above allow for smooth spool-up.
Hover is somewhere just over 65% of stick