RE: ChinModel Cessna 337 Skymaster Build
Building the wing in brief
- Prepare wing parts
- Place S6 in position. makes sure the bottom edge of S6 even with S3
- Trim and sand to shape wing tips as shown in the photo
- Sand dorsal air scoop smooth
- Glue SF3 in position and sand corner round
- Glue WS4 to WS 1. Install aileron servo as shown in the photo
Building the booms in brief
- Prepare the tail boom parts
- Temporarily place BPT1-BPT2 into position. Do not glue them to WP5
- Without gluing, put the Fins into position on the booms
- Glue BPT4 into position as shown in the photo