Falcon 40 v2 spare parts (screw)
Greetings, all! I'm new to R/C helicopters and new to this forum, so I hope I've posted this in the right spot.
I purchased a Falcon 40 V2 and have already burned through most of my spare parts. However the one I'm particularly interested in is the screws that hold the landing gear to the frame. Does anyone know what type of machine screw &nut that is? For some reason, the right-front screw &nut keep falling out. The other three seem so be good and tight. I can't seem to find anyone selling just the screws for this model.
Any help would be appreciated.
Otherwise, I think I'm getting the hang of flying. I turned down the servo sensitivity, leveled the swash plate, balanced the flybar and paddles, replaced the stock baldes with SuperBlades EZ (used Dremel tool grinder to modify them to fit in V2 blade holder), and now my crashes are becoming less dramatic!
-Bill