RCU Forums - View Single Post - engine tuning
View Single Post
Old 08-11-2010, 11:43 AM
  #3  
MinnFlyer
Senior Member
My Feedback: (4)
 
MinnFlyer's Avatar
 
Join Date: Apr 2002
Location: Willmar, MN
Posts: 28,519
Likes: 0
Received 8 Likes on 8 Posts
Default RE: engine tuning

It could be a combination of being too rich on the low end AND not closing enough. So when you go to low throttle, the barrel goes to, say, 1/4 throttle, and then the engine slowly loads up and the RPM decrease.

Let it settle into an idle and pinch the fuel line. If it slowly revs up and takes several seconds before it dies, then the low end is too rich