crashland 73

My Feedback: (24)

I bought me one of them keyless entry looking key fob & i cant figure out how to mount it securely. Im wanting to mount it on the wingtip.

Tinkman

Is this the camera you have?
http://chucklohr.com/808/#Instructions3
If so, I have a mount that could work with little modification. I typically make mounts for helicopters, but it would just be a mater of changing the hanger. Attached is a sample.

Joaquin

crashland 73

My Feedback: (24)

Yep thats it. How much for that mount?

richardgerardi

I use velcro to mount on planes works fine.

Tinkman

Crashland,
That mount is in the early stagesof develpement and will beabout 20.00, but it's designed to tilt the camera with adirect drive servo. If you don't want the tilt axis it will be about half that. I just need to know how you want to mount it to the wing. Screw placement, dimentions, etc. If your interested, PM me with the details and I'll design a custom mount for your application.
Joaquin

crashland 73

My Feedback: (24)

I aint sure of how to mount it yet.

Tinkman

Once you come up with something let me know. I can do something like the rendering if you want in under the wing, or the other way around for on top.Joaquin

sal37

Just tape it to the wing. Thats all i do and I have a lot of successful flights with it. If you want to be extra safe, tie a safety string onto a wing strut and through the camera keychain hole.

PEDproducts

We've developed a very versitile mount for all the 808 series cameras.Check out the new ActionCam & Mounthere.

We alo invite any feedback or comments.

PED Products

crashland 73

My Feedback: (24)

Now thats just down right inovation! Much better than my velcro settup. I wouldnt mind doing a field test on that. To check on vibration & stuff.

PEDproducts

Check out the week long holiday discounts; 15% off everything in the store on top of the already discounted prices. Home of the ActionCam

PED Products
www.ped-products.com

reprapperMC

I have a 3D printer and am going to print up a mount for my plane. If any one has any customs designs they want printed I can print them up. I may also print a few extra of my design to sell. Still designing it now, but should have something in the next week or so.

Tinkman

What type of printer do you have?

Joaquin

reprapperMC

I have a MendelMax RepRap printer. I just upgraded to this a couple months ago from a Prusa Mendel.Here is a photo: https://picasaweb.google.com/1050014...88820026480914

Tinkman

What media does it use? Photopolymer, Nylon, ect?
Looks like extruded PVC.

reprapperMC

Currently the RepRap community is printing prominently ABS and PLA plastics. A few have started using polycarbonatesuccessfullybut a different extruder hotend is needed for it. With that said, I am currently only printing ABS and PLA.

You can find more info about the reprap community and printers at www.reprap.org

Here is video of a simple print (it's a little tool to help keep a book open when holding it):https://picasaweb.google.com/1050014...09784206558514

combatman

Is your Actioncam any different than the 808 cameras sold on eBay for ~$15?

PEDproducts

Any camera that you are getting for $15 is not HD. Also does not include a memory card, car charger etc. We are just releasing a weatherproof cover, check it out! HERE(http://ped-products.com/index.php?di...product_id=146)

Regards,
PED Products
www.ped-products.com

PEDproducts

Special discount for RC Memebers. Any ActionCam, Mountsor ActionCam Accesories are 25% off when you enter a "PED-RC" during check-out.
You asked, and we responded.

Regards,
PED Products