Logo 10 aerial rig, have some questions.
06-24-2009, 12:00 PM
#1
Member
Thread Starter
Join Date: Sep 2004
Location: spring, TX
Posts: 99
Likes: 0
Received 0 Likes
on
0 Posts
Logo 10 aerial rig, have some questions.
I have a logo 10 and have recently custom built an aerial photography rig for it. (will post pics tomorrow). My question is about gearing, Im running a Hacker C50 14L 1740rpm/v Motor and a 200t Main gear. Im unsure of the Speed control but I know its Jeti... Maybe 50 or 70?? Im running a 4s1p 4000mah Li-po.
Logo is mostly stock other than carbon blades.
Im wondering what Pinion i should be using for this setup. I want to keep things cool, the entire camera rig should be around 2lbs or less auw. I would just be doing easy flying for the camera but want to make sure i have the power to pull out in an emergency situation. Any suggestions out there? Thanks a lot - Chris
Logo is mostly stock other than carbon blades.
Im wondering what Pinion i should be using for this setup. I want to keep things cool, the entire camera rig should be around 2lbs or less auw. I would just be doing easy flying for the camera but want to make sure i have the power to pull out in an emergency situation. Any suggestions out there? Thanks a lot - Chris
