XP3.1 GPS/INS stabilizer and autopilot for heli
04-02-2009, 07:53 AM
#1
Junior Member
Thread Starter
Join Date: Apr 2009
Location: Puise, ESTONIA
Posts: 2
Likes: 0
Received 0 Likes
on
0 Posts
XP3.1 GPS/INS stabilizer and autopilot for heli
We are happy to inform, that DJI Innovation XP3.1 helicopter GPS/INS stabilizer/autopilot is now available also for European customers.
DJI XP3.1 is a controlling system for unmanned RC helicopter system, integrated with GPS with internal Kalman filter, 6-DOF inertial measuring unit, magnetic-field meter and barometer. The system could control the helicopter precisely and reliably at any flight altitude, in most weather conditions, and even under the short-interruption of GPS signal situation.
By combining the high precision of position measurements from the GPS receiver and environment independent and high update rate nature of inertial navigation sensors, the autopilot is able to provide accurate position and altitude hold (within 1-2m or better), and constant velocity cruise control at any height and light condition.
Unit is future upgradeable to fully autonomous map mode: fly by waypoints. All upgrading will be made by software renewal.
Unit is configurable via pc and standard USB port.
[link=http://www.coptercam.ee/uav/docs/xp31_flight.avi]ONBOARD VIDEO[/link]
[link=http://uav.coptercam.ee]More info[/link]
Joel Tammet
DJI Innovation European distributor
DJI XP3.1 is a controlling system for unmanned RC helicopter system, integrated with GPS with internal Kalman filter, 6-DOF inertial measuring unit, magnetic-field meter and barometer. The system could control the helicopter precisely and reliably at any flight altitude, in most weather conditions, and even under the short-interruption of GPS signal situation.
By combining the high precision of position measurements from the GPS receiver and environment independent and high update rate nature of inertial navigation sensors, the autopilot is able to provide accurate position and altitude hold (within 1-2m or better), and constant velocity cruise control at any height and light condition.
Unit is future upgradeable to fully autonomous map mode: fly by waypoints. All upgrading will be made by software renewal.
Unit is configurable via pc and standard USB port.
[link=http://www.coptercam.ee/uav/docs/xp31_flight.avi]ONBOARD VIDEO[/link]
[link=http://uav.coptercam.ee]More info[/link]
Joel Tammet
DJI Innovation European distributor
