Mark Dennis

My Feedback: (4)

Here are a few pictures of the new 50cc Extra 260.

Wing Span: 84"
Wing area: 1260
Weight: 15.5#'s

This will also be at Toledo so be sure to stop by and check it out.

bubbagates

My Feedback: (32)

Mark,

You're driving me nuts..knock it off posting all of these nice aircraft. My wallet can't stand it

Mark Dennis

My Feedback: (4)

Well I figuered those of you that can't make it to Toledo shouldnt miss out. I forgot to mention this plane will come with a custom throw meter along with a secound tank for somke along with all of the other featuers of the QB series.

bubbagates

My Feedback: (32)

Well, I have the Yak 50cc on the way and if the Yak is as nice as I hear, then I'll pry open my wallet. Will you be taking orders at Toledo?

Mark Dennis

My Feedback: (4)

Yes we will be, this planes mauel is almost done and we will fly after Toledo if all goes well we hope to start production soon.

bubbagates

My Feedback: (32)

One last question. Is it canister ready, i.e. tunnel already there?

I'm very interested in this, especially if a canister can be done

Mark Dennis

My Feedback: (4)

Of course it is preinstalled not only for a can but for a tuned pipe. All of our planes are Pipe and Can readdy.

shakes268

I like the size of the 50cc but I like the covering of the 75cc. I guess I'll eventually have to have both - good thing I'm single!

Mark Dennis

My Feedback: (4)

Here are a few pics of the included custome desighned throw meter, this will come with all of the future Aeroworks planes including all of the yaks and all of the 260's. We will also provide two tanks one for fuel and one for smoke if you chose to use it along with all of the fuel line and hardware. There will also be clear covering provided to seal the gaps and best of all SAE hardware included.

bubbagates

My Feedback: (32)

Mark,

Aeroworks is really going to tow with the QB series. These are gonna sell BIG time. I was looking at the 75Cc yak on the web site today and drooling over it big time and saw the pics with the tanks and throw meters, cool stuff

Mark Dennis

My Feedback: (4)

Thats the idea. We at Aero-Works are all modelers too and the one thing we hate doing is having to run out to the hobby shop to buy that last bit of hardware for the plane you are trying to finish. So we figuered that most of you were like us and are now striving to bring you the most complete ARF on the market today. And the other advantage to these is that you can truly be flying in very little time which is perfect for todays customer who has very little time to build but wants a nice plane that flys well.

bubbagates

My Feedback: (32)

I have a change of plans and will not be getting to Toledo this weekend [:@] so as soon as they hit the web site you can be I'll be pre-ordering this bad boy. The Kirby graphics pak that came with the Yak was a nice touch [sm=thumbup.gif]

bodywerks

My Feedback: (4)

I'm gettin' on the list for the 75CC Yak today! I am looking for rediculous P2W and a beautiful ARF. That plane and a BME 110 will surely fit the bill!

3DCrazy516

I saw this up toledo and man does it look nicee!! Anymore info about prices, release dates, etc.????

bubbagates

My Feedback: (32)

I actually ended up going to Toledo and did pre-order one. I think we are looking at roughly a couple of months. They had not yet flew the one they had in Toledo which was a protoype so they were not sure if any more work needed to be done to it

3DCrazy516

What about a price?

bubbagates

My Feedback: (32)

I forget exactly what the tag said that was sitting in front of the plane. I seem to think it was right around the same price as the 50cc Yak

3DCrazy516

Do you know if anyone would be selling combos (plane, DA 50)? I know that chief aircraft did but I don't think the deal with aero-works anymore.

micp

My Feedback: (3)

According to Rocco the price is 595.00 plus shipping.

Tom

bubbagates

My Feedback: (32)

Mark,

Do you know about when this plane will be ready. When I spoke to Rocco at Toledo the maiden was not done yet on the prototype. I know if you have any idea it is not set in stone as there may have been some tweaks needed. I'm just trying to get an idea since I pre-ordered one at Toledo

Mark Dennis

My Feedback: (4)

We madined her yesterday and she flew awesome. We needed to make very minor changes to this one and don't expect to need another prototype. If all goes well we should start production once the 75cc yaks are done being built and then there on that slow ship from china to Colorado.

Mark Dennis

My Feedback: (4)

Here are a few pics we got of here at the field. The 100cc in the background is mine as you can see the plane is identical just smaller.

3DCrazy516

Will you have these planes (50cc,75cc,& 100cc) down Joe Nall?

bodywerks

My Feedback: (4)

Well, Mark, I can't resist! I think I have to have one of these, too! Depending on where the batteries end up with a DA, I may go with the BME 55, or will save up and make it an electric project - been wanting to do that for a while!

SU-13

My Feedback: (1)

wats with all these beutiful planes, my list is getting bigger and bigger, im starting to run out of paper