Servo`s for 260?
#4
Senior Member
Thread Starter
My Feedback: (43)
Join Date: Aug 2004
Location: Portage,
IN
Posts: 257
Likes: 0
Received 0 Likes
on
0 Posts
RE: Servo`s for 260?
Ditto on this the 56XX are not good enough for any 100cc aileron! Period... Flutter will result..dont ask me how I know..
Oh my sukhoi has a 3W100 AND not a bit of flutter
The CAP has the 3W 106 that has the devil in it its insane and again NO flutter...
#7
My Feedback: (15)
RE: Servo`s for 260?
I use JR 8611A on Aileron, Elev, Rudder, and Throttle.... I take no chances with my stuff, trying to be cheap and use the 56XX is just asking for it IMO...say what you want, but I have learned my lesson a long time ago...the 59XX is a great servo as is the new 5955's...
#8
Senior Member
Thread Starter
My Feedback: (43)
Join Date: Aug 2004
Location: Portage,
IN
Posts: 257
Likes: 0
Received 0 Likes
on
0 Posts
RE: Servo`s for 260?
so what are you guys using on elevators?
I use JR 8611A on Aileron, Elev, Rudder, and Throttle.... I take no chances with my stuff, trying to be cheap and use the 56XX is just asking for it IMO...say what you want, but I have learned my lesson a long time ago...the 59XX is a great servo as is the new 5955's
#10
My Feedback: (389)
Join Date: Jan 2004
Location: Freeland,
MI
Posts: 360
Likes: 0
Received 0 Likes
on
0 Posts
RE: Servo`s for 260?
Hey mu2 do you have all thets left of the 260 100cc AW birds or are there more at the mother ship. I want one in the red color like the new upcoming 50cc bird thats due in lat Aug. do you have any info one the next shipment of 100cc 260 in the red if there is such a thing?
#14
My Feedback: (389)
Join Date: Jan 2004
Location: Freeland,
MI
Posts: 360
Likes: 0
Received 0 Likes
on
0 Posts
RE: Servo`s for 260?
I'm in, Red 260 100cc thats what I,m talking about. As for servos 5955TG full house with no regrets. DA 100 with cans is what I,m going to run. I think I will sitck my BME 110 in my 33% Bob Dively Pitts S2 That I,m building. It will balance out pretty good in that airframe its light and short fuse make for the perfect airframe for the BME 110.
#15
My Feedback: (15)
RE: Servo`s for 260?
ORIGINAL: lazy eight
I'm in, Red 260 100cc thats what I,m talking about. As for servos 5955TG full house with no regrets. DA 100 with cans is what I,m going to run. I think I will sitck my BME 110 in my 33% Bob Dively Pitts S2 That I,m building. It will balance out pretty good in that airframe its light and short fuse make for the perfect airframe for the BME 110.
I'm in, Red 260 100cc thats what I,m talking about. As for servos 5955TG full house with no regrets. DA 100 with cans is what I,m going to run. I think I will sitck my BME 110 in my 33% Bob Dively Pitts S2 That I,m building. It will balance out pretty good in that airframe its light and short fuse make for the perfect airframe for the BME 110.
Nice!
#18
Senior Member
Thread Starter
My Feedback: (43)
Join Date: Aug 2004
Location: Portage,
IN
Posts: 257
Likes: 0
Received 0 Likes
on
0 Posts
RE: Servo`s for 260?
Well i useing 5945`s everywhere but on the rudder runing a 8611 there put three flights on it today.I like the plane alot i would have had the yak on the way but i fill AW did me wrong so now looks like ill find something else.
#20
My Feedback: (13)
Join Date: Apr 2005
Location: Geneva,
IL
Posts: 48
Likes: 0
Received 0 Likes
on
0 Posts
RE: Servo`s for 260?
I'm using 8611A's on everything except throttle and don't have any problems at all. I love the aircraft. Never had a better airplane. IMO, if you're gonna get a $1000 airplane, why not do it right and make sure you don't skimp on anything at all?
#22
Senior Member
Join Date: Mar 2005
Location: Vicksburg, MS
Posts: 710
Likes: 0
Received 0 Likes
on
0 Posts
RE: Servo`s for 260?
I have 8611s all around except for throttle which is a 8231. My TX is a 10X.
Now get this. The servos/TX/plane's control surfaces are so "tight" that I had to re-learn how to do a snap roll!! Why you ask? It is because I USED to bang the sticks in one corner or the other and then just lift my thumbs off of the sticks. The sticks would do that "twang" thing, vibrate back and forth slightly. Well, the 260 would faithfully follow those sticks!! That following would look like the plane was vibrating - it was amazing!! I had to learn to gently let the "corner" pressure return to neutral then the snaps looked pretty good.
I have never had a plane that would come even close to the above situation!! At 28.5 lbs my 260 flys like a feather. I let a youngster who does foamy 3D flyi my 260 while I exchanged my sunglasses for my regular glasses and I heard the peanut gallery whooping and holloring and I about croaked when I saw my 260 hovering and doing all of that foamy 3D stuff!!!! I had told the boy not to do anytning full throttle and he wasn't!! I actually enjoyed watching him fly that stuff!!
Anyway, good job Aeroworks. BTW, is there any plan of doing another color besides red? I kind of like the yellow/blue/white and would like it even better if the yellow were darker (like cub yellow)!!!! What say ye?
Bobby
Now get this. The servos/TX/plane's control surfaces are so "tight" that I had to re-learn how to do a snap roll!! Why you ask? It is because I USED to bang the sticks in one corner or the other and then just lift my thumbs off of the sticks. The sticks would do that "twang" thing, vibrate back and forth slightly. Well, the 260 would faithfully follow those sticks!! That following would look like the plane was vibrating - it was amazing!! I had to learn to gently let the "corner" pressure return to neutral then the snaps looked pretty good.
I have never had a plane that would come even close to the above situation!! At 28.5 lbs my 260 flys like a feather. I let a youngster who does foamy 3D flyi my 260 while I exchanged my sunglasses for my regular glasses and I heard the peanut gallery whooping and holloring and I about croaked when I saw my 260 hovering and doing all of that foamy 3D stuff!!!! I had told the boy not to do anytning full throttle and he wasn't!! I actually enjoyed watching him fly that stuff!!
Anyway, good job Aeroworks. BTW, is there any plan of doing another color besides red? I kind of like the yellow/blue/white and would like it even better if the yellow were darker (like cub yellow)!!!! What say ye?
Bobby